QF4A512 Programmable Signal Converter Differential or Single-Ended Inputs Programmable (1x, 2x, 4x, 8x) Gain Amplifiers Anti-Aliasing Filter, 3rd Order Bessel 16-bit Programmable A/D Converter Internal Voltage Reference Individually Programmable 512-tap Digital FIR Filters 3 Wire SPI Port Interface Digital 3.3V I/O, 5 Volt Tolerant 4K Byte EEPROM for non-volatility The QF4A512 Programmable Signal Converter (PSC)  is a 4-channel, signal conditioner,  signal converter and precision FIR digital filter. Each channel can be individually programmed for the gain, anti-aliasing filter cut off frequency, A-to-D sampling frequency, and filter characteristics. Quickfilter Pro Design Software, included with the Development Kit,  allows rapid device configuration and filter design at performance levels unattainable with analog components.  The QF4A512 has been chosen as an Editor’s Choice product for the Jan/Feb 2007 issue of Military Embedded Systems magazine Support Tools Click here for our QF4A512-DK Development Kit Check out the QF4A512-PA Programming Adapter which plugs into the QF4A512-DK and allows for programming or verification of individual QF4A512 devices.     Site Map   |  Career Opportunities  |  Contact Webmaster 1024 S. Greenville Avenue   |   Suite 100   |   Allen, Texas 75002   |   Office:  214-547-0460   |   Fax:  214-547-0481    Website Designed by Visuplay Interactive                           Copyright 2006  Quickfilter Technologies Inc. All Rights Reserved